HOW IS THE RIGHT WASHING THE ENGINE OF THE MACHINE?
Such recommendations as to how to correctly / correctly wash the engine of a car and with what frequency it is not. But, there are several nuances explaining why it is better to keep internal mechanisms clean. This article will discuss why you need and how to properly wash the engine, so as not to fill the electrics. WHY DOES IT NEED TO DO? Dirt on the engine makes it difficult to control the leakage of technical fluids (coolants, oil). In the event of a malfunction, the motorist will not be able to notice the malfunction in time and, as a result, runs the risk of getting more serious problems. Then, the build-up of dirt impedes the heat transfer of the motor and contributes to its overheating. That is, the wear process is accelerated. With regard to electrical wiring, the dirt formed on it can impede the start (current leakage occurs). Another important aspect is that a clean engine is less fire dangerous. Oil spills formed in the engine compartment, evaporating and forming combustible vapors, can cause ignition. A clean unit is easier and more enjoyable to maintain. Most auto workshops simply refuse to take to work cars with heavily polluted engine compartment. For self-cleaning the engine, you can use water with shampoo, or for a better removal of dirt you can buy a special cleaner. Foamy engine cleaner Quickly removes any contamination from the engine compartment: burned technical fluids, oil leaks, and salt residues. Powerful additives, forming an active foam, allow the composition to penetrate into the gaps between the parts, soak and remove even old dirt. Safe for plastic and rubber. HOW TO WASH? That’s right – it does not wash the engine with water under high pressure. Otherwise there will be more harm than good. In this way, it is easy to damage the insulation and cause corrosive processes inside the connectors in the generator, distributor, various relays, etc. A strong jet can wash away stickers with important information in the engine compartment, as well as damage the paint on some parts. It is necessary to use a weak stream of water with the use of high-quality car chemicals and special auto shampoo. No household detergent by a competent person should be seriously considered due to their inefficiency / worthlessness against engine oil. The process itself is as follows: We insulate with polyethylene everything that is afraid of moisture (connectors, generator, air filter inlet and interrupter); We warm up and turn off the engine (it should be warm, but not hot); Remove the battery (you can not remove, but it is better to disconnect the negative terminal); Apply detergent and give a couple of minutes to dissolve the dirt; Wash off, remove insulation and dry. The battery can be treated with a mixture of water and baking soda in equal proportions, which is important after a stationary battery charging to reduce the degree of its discharge. This is a good tool to save it from corrosion. After washing, the engine is optimally dried with a compressor, but it can also be vacuumed. In extreme cases, you can start it and wait until the moisture evaporates. Then you should wipe all the rags. It is recommended to wash the motor once / twice a year.